SMA sunny home manager - Page 56

6. Select [Identify].
☑ SunnyPortal searches for the SunnyHomeManager with the corresponding serial
number and registration ID. The PV System Setup Assistant displays the correct
SunnyHomeManager with a green tick.
✖ The PV System Setup Assistant cannot find any SunnyHomeManager with the entered
serial number and registration ID?
• See Troubleshooting (see Section10, page62).
7. Select [Next].
☑ The SunnyHome Manager now searches for BLUETOOTH devices within range and for
devices in the local network. After a maximum of ten minutes the PV System Setup
Assistant lists the serial numbers of any available BLUETOOTH devices and devices in
the local network.
✖ The PV System Setup Assistant is unable to establish a connection to the
SunnyHomeManager, the BLUETOOTH devices within range or the Speedwire
devices?
or
The PV System Setup Assistant lists none or not all of the BLUETOOTH devices or
Speedwire devices in your PV system?
• Select [Refresh]. If the PV System Setup Assistant continues to list none or not all of
the BLUETOOTH and Speedwire devices, see Troubleshooting (see Section10.3,
page67).
✖ The PV System Setup Assistant lists own and third-party devices?
• See Troubleshooting (see Section10, page62).
8. Activate the checkboxes of the devices you wish to add to the SunnyHomeManager system.
Tip: You can identify devices using the previously noted serial numbers.
9. Select [Add] to add the devices to the SunnyHomeManager system immediately.
☑ The system password is transferred to the devices. This process can take several minutes.
The devices are then shown with a green tick.
✖ Some devices are shown with the warning symbol?
SunnyHomeManager cannot access the devices. You may have entered an invalid
system password or the connection to the devices could not be established.
• See Troubleshooting (see Section10, page62).
10. Select [Skip forward] to add the devices to the SunnyHomeManager system at a later time
and continue with registration. Tip: You can add the devices to the SunnyHomeManager
system as new devices after registration (see the user manual "SunnyHomeManager in
SunnyPortal").
☑ The window Meter Configuration opens.
11. Select [Next].
☑ The window Meter Configuration opens.
8 Commissioning
SMA Solar Technology AG
Installation ManualHoMan-IA-en-2056