SMART Board 6000S Series Installation And Maintenance Guide

Appendix A Adjusting settings
smarttech.com/kb/171414 64
Option Values Function Notes User or system
setting
SMARTBoard with iQ On
Off
Enables or disables the iQ
experience.
[N/A] System
Default input Inputs available
on the display.
Select the default input the display
will use when starting.
The iQ
embedded
experience is the
default input.
System
Home Button Brightness High
Medium
Low
Sets the brightness of the Home
button LED.
Default is Low.
This option is not
available for
SMART Board
6000S (V3)
models.
System
Home Button Activation
Interval
80 milliseconds
180 milliseconds
280 milliseconds
560 milliseconds
1120 milliseconds
2080
milliseconds
Sets the sensitivity of the Home
button.
Default is 80
milliseconds.
System
Home Button Mode Use physical
button to go
home (Default)
Sets the behavior of the Home
button.
Default is Low.
This option is not
available for
SMART Board
6000S (V3)
models.
System
Power
Turn on when people are
nearby
On
Off
Sets the display to turn on if the
presence detection sensors detects
users in the room.
This option is off
by default.
System
Turn screen off after Disabled
1 min
5 mins
30 mins
1 hour
1.5 hours
2 hours
5 hours
10 hours
Sets the number of minutes of
inactivity before the display goes in
to an energy saving mode.
The default is 60
minutes.
System
Energy Saver

SMART Board 6000S Series Specifications

General

Resolution	4K UHD (3840 x 2160)
Screen Sizes	65", 75", 86"
Aspect Ratio	16:9
Touch Points	20
Brightness	350 cd/m²
Contrast Ratio	4000:1
Response Time	8 ms
Wall Mountable	Yes
Connectivity	HDMI, USB, VGA, DisplayPort
Operating System	Android