Appendix A Adjusting settings
smarttech.com/kb/171414 65
Option Values Function Notes User or system
setting
Go to energy saving
mode after
Disabled
1 min
5 mins
30 mins
1 hour
1.5 hours
2 hours
5 hours
10 hours
Sets the number of minutes of
inactivity before the display enters
an energy saving mode.
The default is 60
minutes.
System
Standby (Shutdown) [N/A] If selected, the display will turn off all
running components to achieve
maximum energy savings but wakes
up slower.
This option is
more energy
efficient.
This option is the
default for
displays in the
EU.
For information
about the
display’s energy
saving modes,
see
About
energy saving
modes
on
page30.
System
Networked Standby
(Sleep)
[N/A] If selected, the display wakes up
faster and can be turned on up by a
Wake on LAN command from the
network.
This option is less
energy efficient.
This option is the
default for
displays not in
the EU.
For information
about the
display’s energy
saving modes,
see
About
energy saving
modes
on
page30.
System
External Inputs
Apply power settings
even when displaying an
external video source
On
Off
If enabled, the display will enter an
energy saving mode even when an
external video input is connected.
[N/A] System
Display
Screen Adjustment
Brightness 0–100 Sets the overall brightness of the
image.
[N/A] System
Advanced Display Options
To Next Page
Loading...
Need help?
General
