SMART Board GX Series - Web Browsing; Whiteboard Application

Chapter 2
Installing the display
smarttech.com/kb/171744 29
7. Select a bandwidth frequency (2.4 GHz or 5 GHz).
NOTE
The default setting is 2.4 GHz. Select 5g to choose a 5 GHz bandwidth frequency. This also enables
the channel selection drop-down list from which you can choose from a range of Wi-Fi channels.
8. Tap Enter.
To connect to the display’s wireless hotspot
1. On a computer or mobile device, view the list of available Wi-Fi networks and select the display’s
wireless hotspot.
2. Type the password for the display’s wireless hotspot.
3. Connect to the display’s wireless hotspot.