SMART CX01 - Set Time

Basic Operation
smart CX01 101
4. Press OK to save your changes and to leave the sub-menu.
5. Leave the menu by pressing EXIT until the screen shows the TV picture.
)
Instead of completely leaving the menu, you can also further
stay in the menu - or in the sub-menu - to perform further set-
tings.
5.7 Set Time
Reasonable operation of the smart CX01Fehler! Unbekannter Name für Doku-
ment-Eigenschaft. require setting of system time. By default, the receiver is set to
GMT
6
Usage, i.e. date and time are taken from the received signal. Time zone is set
to GMT + 1 hour (+ 1:00) by default. Required changes can be made in the sub-
menu Time:
1. Select the menu System Setup (see above).
2. Select the sub-menu Time and confirm by pressing OK.
3. Select the item GMT Usage and switch on or off GMT Usage by using the keys
/ or / .
On = automatic time setting via satellite signal is activated.
Off = automatic time setting via satellite signal is deactivated.
)
smart recommends to keep the presetting
(GMT Usage On).
4. Select the item GMT and select your time zone by using the keys / or
/ ; for example, the time zone of Germany, Austria and Switzerland is
GMT +1:00.
5. Select the item Summer Time and switch Summer Time Off or On by using the
keys / or / .
)
¾ Please verify the presetting and correct them, if required. Please
also consider corresponding change of those settings.
6
GMT = Greenwich Mean Time