Extended Settings and Functions
smart CX01 133
7.4 Menu Tools
7.4.1 Software Version
The sub-menu Information displays the current version number of the smart
CX01Fehler! Unbekannter Name für Dokument-Eigenschaft. software.
7.4.2 Factory Settings
If you erroneously saved wrong settings or if you want to pass on the receiver with-
out your settings, then you can reset the receiver to the factory settings (reset):
To reset the receiver:
1. In the menu Tools, select the sub-menu Factory Settings.
2. Press the OK key.
You will be asked if you want to reset the receiver and delete individual settings.
3. Select Yes or No by using the keys / und / , and then press OK.
After resetting your receiver, the language selection menu will be displayed.
7.4.3 Display Setting
This sub-menu can be used to edit various display settings:
¾ Select Brightness to change the brightness value from 0 to 100 (default value is
50) by using the keys / and / .
¾ Select Contrast to change the contrast value from 0 to 100 (default value is 50)
by using the keys / and / .
¾ Select Saturation to change the saturation value from 0 to 100 (default value is
50) by using the keys / and / .
¾ Select Hue to change the hue value from 0 to 100 (default value is 50) by using
the keys / and / .
¾ Select Sharpness to change the sharpness value from 0 to 10 (default value is 5)
by using the keys / and / .
7.4.4 Update of the Receiver Software
There are two possibilities to update your receiver:
To Next Page
Loading...
