SMART CX01 - Timer; Sleep Timer Setting

Extended Settings and Functions
smart CX01 129
Value Meaning
Auto Default setting: the receiver selects optimum value
4:3PS For playback with a 4:3 screen, PS = Pan & Scan:
x 4:3 program: picture is optimally displayed.
x 16:9 program: picture height is adjusted to screen; picture infor-
mation on the right and left are missing.
4:3LB For playback with a 4:3 screen, LB = Letterbox
x 4:3 program: picture is optimally displayed.
x 16:9 program: picture width is adjusted to screen; lacking height is
filled up by black bars.
16:9 For playback with a 16:9 TV set
¾ Select Digital Audio Out to set the format of the digital audio signal by using
the keys / and / :
PCM – Pulse Code Modulation (default),
DD – Dolby Digital (multi-channel audio).
)
For programs broadcasted in DD format, select DD if you have a
connected DD-compatible multi-channel amplifier or a DD-
compatible home cinema system, or if your TV set is capable of
processing DD signals.
7.3.2 Timer / Sleep Timer Setting
With the timer in the smart CX01 you can either program a channel switch or it
serves as sleep timer.
Im Untermenü können bis zu acht verschiedene Events (Ausschaltvorgänge oder
Programmwechsel) programmiert, bearbeitet bzw. gelöscht werden.
In the sub-menu Timer you can program, edit and delete up to eight different
events (channel switch or shut down).
1. In the sub-menu Timer Setting, mark a timer by using the keys / PR+ and
/ PR-.
2. Press the OK key to open the timer.
3. Mark the line Timer Mode by using the keys / PR+ and / PR-.