Basic Operation
smart CX01 109
¾ Press the red function key to access
the window Time:
x Here, select the function on the
bottom by using the keys /
and / :
¾ Press OK when is selected to go to the current program. The current pro-
gram is marked with .
¾ Press OK when is selected to go one program forward or back.
¾ Press OK when is selected to go two hours forward or back.
¾ Press OK when is selected to go one day forward or back.
¾ Press OK when is selected or press EXIT to close the window Time and to
return to the EPG window.
¾ Press the green function key to include channel, date, switch-on time and
duration of the marked program into a timer. The Timer Mode is set to Once by
default; Timer Service is set to Channel. You may change settings as described
in section 7.3.2, page 129.
¾ Press the blue function key to leave the EPG window and return to the window
Single EPG.
¾ Press the EXIT key to leave the EPG window and return to the TV program.
5.8.6 Audio Settings
1. Press the key AUDIO.
2. Select the audio mode by using the keys / and / .
Depending on the selected channel and the current program, the following
modes are available: Left - Right - Stereo - Mono.
3. Press the keys / PR+ or / PR- to select another language or Dolby AC3
(Dolby Digital) as far as provided by the TV station.
4. After selecting the desired audio mode, leave the menu by pressing the EXIT
key.
To Next Page
Loading...
