SMART CX01 - OSD Setting; Other

Extended Settings and Functions
smart CX01 131
)
You can directly add programs marked in EPG to the
timers. This significantly facilitates programming as you do not
have to make settings for channel, date and time.
7.3.3 OSD
14
Setting
Hide OSD
¾ Using the keys / and / , set the number of seconds after which
the OSD should be hidden. You may set values from 1 to 10 seconds.
Default value is 5s (factory setting).
OSD Transparency
¾ Select transparency of the on-screen menu by using the keys / and
/ .
You may set values from 0% (OFF) (no transparency) to 40% (almost transpar-
ent). Default value is OFF.
7.3.4 Other
¾ Select LNB Spannung, to switch on /off the LNB supply voltage at LNB IN us-
ing the keys / und / .
)
Based on new EC regulations, this receiver is equipped with an
energy saving system. After three hours, the receiver will auto-
matically switch to energy save mode (energy consumption of
less than 1 W) unless a function is triggered via remote control
during such period (e.g. volume change or switching of chan-
nels). You can deactivate the automatic standby function via
the menu.
¾ Select Auto Standby to switch on or switch off the automatic standby function,
using the keys / and / (factory setting is Auto Standby On).
14
OSD = On Screen Display