SMC Networks HRSH200-A*-20 Series - Anti-Snow Coverage Function; Anti-Snow Coverage Function Setting and Checking; Off

HRX-OM-Q026-B
Chapter 5 Display and setting of various functions
5.18 Anti-snow coverage function HRSH Series
5-44
5.18.2 Anti-snow coverage function setting and checking
The table below explains the setting items of the anti-snow coverage
function and the initial values.
Table 5.18-1 List of set anti-snow coverage function
Display Item Content
Initial value
(Default setting)
Anti-snow
coverage function
Sets anti-snow coverage function OFF
1. Press and hold the [MENU] key for approx. 2 sec.
Repeat pressing the key until the setting screen for key-lock [
] appears on the
digital display.
PV
SV
PV
SV
PV
SV
Anti-snow coverage Setting and checking
2. Press the [SEL] key 28 times.
The set screen of anti-snow coverage function is displayed on the digital display.
PV
SV
3. Select anti-snow coverage function from the table below with [▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 5.18-2 List of set value
Set value Explanation
Initial value
(Default setting)
Anti-snow coverage function OFF
○
Anti-snow coverage function ON
4. Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
PV
SV
［MENU］
Press and
hold
［MENU］
Press and
hold