HRX-OM-Q026-B
Chapter 4 Starting the Product
4.4 Starting and Stopping HRSH Series
4-8
Except in case of emergency, do not turn off the breaker until the
product has stopped completely. Otherwise it may cause a failure.
4.4.2 Stopping the product
1. Press the [RUN/STOP] button on the operation panel.
The [RUN] lamp on the operation panel flashes green at 1 second intervals, and
continues operation to prepare to stop. After approx. 20 seconds, the [RUN] lamp goes
off and the product stops.
Fig. 4-9 Stopping the product
2. Shut off the breaker of the customer’s power supply.
Flash
OFF
Press
To Next Page
Loading...
