HRX-OM-Q026-B
Chapter 5 Display and setting of various functions
HRSH Series 5.6 Run timer, stop timer function
5-17
5.6.2 Setting and checking of Run timer and stop timer function
The table below explains the setting items of the run/stop timer and the initial
values.
Table 5.6-1 List of set run timer and stop timer
Display Item Contents
Initial value
(Default setting)
Run timer Sets run timer. 0.0H
Stop timer Sets stop timer. 0.0H
This part explains the setting and checking items of both the run and stop
timers. Please refer to the applicable items for the timer you wish to use.
1. Press and hold the [MENU] key for approx. 2 sec.
Repeat pressing the key until the setting screen for key-lock [
] appears on the
digital display.
PV
SV
PV
SV
PV
SV
Run timer Setting and checking
2. Press the [SEL] key once.
The set screen of run timer is displayed on the digital display.
PV
SV
3. Set the run timer as the table below with [▲] key or [▼] key, and confirm by pressing
“SEL”.
Table 5.6-2 List of set value
Set value Explanation
Initial value
(Default setting)
Timer OFF
○
to
Operation starts after set time.
Setting unit is 0.5 hour
E.g. Set at 5:30pm the previous day. Operation starts 14 hours later (7:30am the next
day).
PV
SV
［MENU］
Press and
hold
［MENU］
Press and
hold
To Next Page
Loading...
Need help?
General
