HRX-OM-Q026-B
Chapter 4 Starting the Product
HRSH Series 4.1 Before Starting
4-1
Chapter 4 Starting the Product
4.1 Before Starting
z Check the following items before starting the product.
Installation conditions
z Check the product is installed horizontally.
z Check that there are no heavy objects on the product, and the external
piping is not applying excessive force to the product.
Connection of cables
z
Check the power, ground and communications (optional) cables are
correctly connected.
Circulating fluid
z
Check proper connection of piping at inlet and outlet.
Automatic fluid filling piping
z
Confirm that the automatic fluid filling port piping is connected properly.
Over flow port piping
z
With or without using the automatic fluid filling function, piping is
necessary.
Fluid level gauge
z
Ensure that the fluid level is between ‘HIGH’ and ‘LOW’.
Only people who have sufficient knowledge and experience about the
product and its accessories are allowed to start and stop the product.
To Next Page
Loading...
