SMC Networks HRSH200-A*-20 Series - Setting Items

HRX-OM-Q026-B
Chapter 3 Transport and Setting Up
3.3 Installation HRSH Series
3-20
 Setting items
Table 3-8 shows the setting items of the external switch. For details, refer to
5.21 Communication function.
Table 3-8 Setting list of the external switch
Display Item
Initial value
(Default setting)
Example
∗
Reference
page
Category
Communication mode LOC LOC
Contact input signal 1 RUN SW_A
Contact input signal 1 type ALT ALT
Contact input signal 1
delay
timer (time delay) of
reading
0 0
Contact input signal 1 OFF
detection timer
0 2
Contact input signal 2 OFF OFF
Contact input signal 2 type ALT -
Contact input signal 2
delay
timer (time delay) of
reading
0 -
Contact input/output communication
Contact input signal 2 OFF
detection timer
0 -
5.21
Communication
setting menu
∗ Example: Connect flow switch A to contact input signal 1 in local mode.