SMC Networks HRSH200-A*-20 Series User Manual

HRX-OM-Q026-B
Chapter 5 Display and setting of various functions
5.15 Accumulated time reset function HRSH Series
5-34
5.15 Accumulated time reset function
5.15.1 Accumulated time reset function
The alarms below are generated to notify the maintenance time.
The product is not stopped for alarm.
z Pump maintenance (AL28): Generated after 20,000h of accumulated
operating time
z Fan motor maintenance (AL29) : Generated after 30,000h of
accumulated operating time.
z Compressor maintenance (AL30): Generated after 30,000h of
accumulated operating time
z Dust-proof filter maintenance (AL40): Generated after 500h of
accumulated operating time.
To reset the alarm, reset the accumulated operating time.
Reset the accumulated time after the replacement of parts (call for
inspection service).
5.15.2 Method of resetting accumulated time reset function
The table below explains the setting items of the accumulated time reset and
the initial values.
Table 5.15-1 List of set accumulated time reset function
Display Item Content
Initial value
(Default setting)
Pump accumulated
operating time reset
Reset the accumulated operating time of the
pump.
NO
Fan accumulated
operating time reset
Reset the accumulated operating time of the
fan.
NO
Compressor
accumulated
operating time reset
Reset the accumulated operating time of the
compressor.
NO
Dust-proof filter
accumulated
operating time reset
Reset the accumulated operating time of the
dust-proof filter.
NO
Refer to each paragraph for the detail of resetting the accumulated operating
time.
1. Press and hold the [MENU] key for approx. 2 sec.
Repeat pressing the key until the setting screen for key-lock [
] appears on the
digital display.
PV
SV
PV
SV
PV
SV
［MENU］
Press and
hold
［MENU］
Press and
hold

SMC Networks HRSH200-A*-20 Series Specifications

General

Brand	SMC Networks
Model	HRSH200-A*-20 Series
Category	Chiller
Language	English