HRX-OM-Q026-B
Chapter 5 Display and setting of various functions
5.21 Communication function HRSH Series
5-80
Contact output signal 1 selected alarm Setting and checking
49. Press the [SEL] key once.
The set screen of contact output signal 1 selected alarm is displayed on the digital
display.
PV
SV
50. Select contact output signal 1 selected alarm from the table below with [▲] key or [▼]
key, and confirm by pressing “SEL”.
Table 5.21-26 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
function setting of digial output 1 is selected
alarm status signal.
to
Sets selection alarm.
Set range is AL.01 to AL.48.
Contact output signal 2 function Setting and checking
51. Press the [SEL] key once.
The set screen of contact output signal 2 functions are displayed on the digital display.
PV
SV
To Next Page
Loading...
