SMC Networks PF2M7 Series User Manual

-50-
No.PF※※-OMW0007-A
■[F90] Setting of all functions
Each time the S button is pressed, the function steps in the order shown in the following table.
<Operation>
Press the UP or DOWN button in function selection mode to display [F90].
Press the SET button. Move on to setting of all function.
[oFF] is selected
Press the SET
button to return to
function selection
mode.
[on] is selected
Setting of functions

Return to [oFF].
Press the SET button
to return to function
selection mode.
Press the
SET button
for 2 seconds
or longer.
[F90] Setting of all functions completed Measurement mode
: Setting of functions
Every time the SET button is pressed, the next function is displayed in order (refer to the following table).
Set by using the UP or
DOWN
buttons.
Refer to each paragraph for the setting details.
Setting of all functions
Press the UP or DOWN button to select
all function settings.

SMC Networks PF2M7 Series Specifications

General

Brand	SMC Networks
Model	PF2M7 Series
Category	Switch
Language	English