SMC Networks PF2M7 Series User Manual

-49-
No.PF※※-OMW0007-A
■[F81] Security code
The security code can be turned on or off and the security code can be changed when unlocked.
<Operation>
Press the UP or DOWN button in function selection mode to display [F81].
Press the SET button. Move on to security code.
Check of the setting of security code
Press the UP or DOWN button to set security code.
(The default setting is [000].)
For instructions on how to enter the security code, refer to
"How to input and change the security code" on page 60.
After entry, the changed security code will flash by pressing
the SET button for 1 second.
(At this point, the changing of the security code is not
completed)
Press the UP or DOWN button to return to setting step.
If the security code entered is incorrect, [FAL] will be displayed, and the security
code must be entered again.
If the wrong security code is entered 3 times, [LoC] is displayed.
Press the SET button to set. Return to function selection mode.
[F81] Security code completed
Security code
Press the UP or DOWN button to select
the setting of security code.
[on] is selected
Press the SET button to set.
[oFF] is
selected
Press the SET
button to return
to function
selection
mode.
Move on to check of the setting
of security code.

SMC Networks PF2M7 Series Specifications

General

Brand	SMC Networks
Model	PF2M7 Series
Category	Switch
Language	English