SMC Networks PF2M7 Series User Manual

-53-
No.PF※※-OMW0007-A
Check of OUT2
Press the UP or DOWN button to
select the OUT2 output check.
•Analogue output
Press the UP or DOWN button to
select the analogue output check.
Press the SET button for 2 seconds or longer. Return to function selection mode.
[F98] Setting of output check completed
: Measurement mode can return from any setting item by pressing the SET button for 2 seconds or longer.

SMC Networks PF2M7 Series Specifications

General

Brand	SMC Networks
Model	PF2M7 Series
Category	Switch
Language	English