SMC Networks TigerStack - Features

Features
All Models
• Push-buttons or switches to segment each hub into inde-
pendent networks
• Front panel LEDs for “status-at-a-glance” troubleshooting:
• Power — one per hub
• NMM — one per hub
• Collision — one per segment
• Segment —one per segment
• Port Status (Link/Partition/Source) — one per port
• Automatic port/segment partitioning and reconnection for
physical level network management and fault tolerance
• Internal transmit/receive crossover on all twisted-pair ports
for connection to adapters with straight-through wiring
• Crossover enable/disable function on one twisted-pair port
in each segment to uplink to a LAN switch or cascade to
another hub with straight-through wiring
• Automatic polarity detection and correction on 10BASE-T
receive pairs to correct miswiring and make connections
simple and quick
• Link integrity checking on all twisted-pair connections
• Smart squelch digital noise filter on all 10BASE-T ports
• Extended distance support for both 10BASE-T and thin coax
cable
• Jabber lock-up protection to prevent overly long
transmissions
• Rack-, table-, or wall-mount chassis design for installation
flexibility
• Internal, auto-ranging power supply
• Reliable point-to-point connections
5
ABOUT THE HUBS