SMC Networks TigerStack - Attaching a Transceiver to the AUI Port

Caution:When attaching a BNC transceiver to an AUI port, be
sure to disable the transceiver’s SQE switch.
Even if only one of the devices has an AUI port, it can be
joined to any port on an another device with the appropriate
transceiver and cable.
For example, the TigerStack 3306FC (with its six fiber ports,
one AUI port, and one BNC port) can be:
• connected to any 10BASE-T adapter with a 10BASE-T trans-
ceiver and a length of twisted-pair cable
To attach a transceiver to the AUI port:
1. Slide the hold-down clip on the AUI female D-Connector to
the open position.
2. Attach the transceiver to the AUI female D-Connector.
3. Slide the clip back to the closed position.
Attaching a Transceiver to the AUI Port
19
CONNECTING