Servodrives / inverters series COSMOS 301X Installation, use and maintenance manual - EN
The servo-drives/inverters of the COSMOS 301X series comply with EN 61800-3 (2004) + A1 (2012)
standards (EMC Requirements); they can be installed in the second environment (“Second Environment”,
category C3), provided they comply with the conditions indicated in this Installation, Use and Maintenance
Manual.
No ordinary/extraordinary maintenance is allowed for COSMOS 301X servo-drives/inverters; in case of bad
operation and/or break, it is necessary to replace the equipment integrally. Any repairs must be performed
exclusively by SMITEC S.p.A.
Ver. 1.09 SMITECdd 11/74
To Next Page
Loading...