Smitec 3010FA - Configurations and Model Codes

Servodrives / inverters series COSMOS 301X Installation, use and maintenance manual - EN
4.3 Configurations / order codes
Up to date, we defined some standard configurations of servo-drives/inverters, with their order code and type
number (4 figures, indicating the series, the maximum current and the release). These data are indicated on
the driver label.
Ver. 1.09 SMITECdd 16/74
TYPE * ** * - * *
Series
3 = 3000
Peak current
01 = 14Apk – 0,75kW
02 = 2 x 12Apk – 0,37kW
15 = 15Apk – 2.2kW
25 = 25Apk – 5.5kW
50 = 50Apk – 7.5kW
HW Version
Sequential number, depending on the other figures
Communication
C = EtherCAT
D = Sercos II
E = Ethernet
F = FlxIO
N = None
R = RS485
S = Sercos III
T = Flextron
Type of motor controlled
A = Asyncronous
B = Brushless
U = Brushless + Asyncronous