Servodrives / inverters series COSMOS 301X Installation, use and maintenance manual - EN
• Click on OK.
• Click the following button on the main window:
• the following window will be displayed, where it will be possible to select the file to be programmed; make
sure to upload the correct file.
• Once the selected file has been uploaded, some information about the file and the controller will be
displayed on Winmicro main window. If the port is correct, the symbol of the USB port will be displayed
near the wording “Port:”.
Ver. 1.09 SMITECdd 68/74
To Next Page
Loading...