8
Introduction Scan Module
2.2.2 Technical Specifications
Dimensions:
Length:
8.04 inches
204.3 mm
Height:
3.82 inches
97 mm
Depth:
1.66 inches
42.1 mm
Weight (including protective hand grip):
0.9 lbs.
0.408 kg
Communications:
Bluetooth 2.0 Class 1
USB Power:
5V @ 500mA
Data Cable Connector Power:
8V to 32V, Maximum 12 Watts
Operating Temperature Range (ambient):
At 0 to 90% relative humidity (non-condensing)
32 to 113°F
0 to 45°C
Storage Temperature (ambient):
At 0 to 70% relative humidity (non-condensing)
–4 to 140°F
–20 to 60°C
Environmental Conditions:
This product is intended for indoor use only
This product is rated for Pollution Degree 2 (normal conditions)
2.2.3 Power Sources
The Scan Module operates on 12V or 24V vehicle power, which it receives through the data cable
connector. The unit powers on whenever it is connected to an OBD-II/EOBD compliant data link
connector (DLC). For non OBD-II/EOBD compliant vehicles, the unit can be powered from a
suitable power port on the test vehicle using the auxiliary power cable supplied with your kit.
To Next Page
Loading...
Need help?
General
