17
Getting Started Powering Down
3.2 Powering Down
All vehicle communication must be terminated before shutting down the Display Device. A
warning message displays if you attempt to shut down while the Scan Module is communicating
with the vehicle. Forcing a shut down while communicating may lead to ECM problems on some
vehicles. Exit the Scan Module before powering down.
z To power down the Display Device:
1. Navigate to the Home screen.
2. Select the Exit button.
3. From the Windows desktop, open the Windows Start menu.
4. Select Turn Off Computer.
5. Select Turn Off in the dialog box.
The open programs close and the power switches off.
3.2.1 Emergency Shutdown
In case of emergency, press and hold the Power button for 5 seconds to force a shutdown.
To Next Page
Loading...
Need help?
General
