Snap-On D10 User Manual

80
Scope Multimeter Operations Operations
Presets
Presets are factory configured meter settings for common component tests. Selecting opens a list
of available setups. Selecting from the list opens the scope multimeter configured to perform the
selected test. In addition to the factory presets, you can create your own custom meter
configurations and save them as presets.
Lab Scope Options
The following options are available for testing:
• 4 Channel Lab Scope
• Volts DC
• Low Amps (20)
• Low Amps (40)
• Low Amps (60)
• Ignition Probe
• 100 psi Vacuum
• 100 psi Pressure
• 500 psi Pressure
• 5000 psi Pressure
• MT5030 Vacuum
• MT5030 Pressure
• EEDM506D Temperature
Ignition Scope Options
The following options are available for testing:
• Parade
• Cylinder
• Raster
• Superimposed
• Single Cylinder Ignition
Graphing Options
The following options are available for testing:
• Dual Graphing
• Volts DC
• Volts DC Average
• Volts AC RMS
• Frequency
• Pulse Width
• Injector Pulse Width
• Duty Cycle

Snap-On D10 Specifications

General

Brand	Snap-On
Model	D10
Category	Medical Equipment
Language	English