- 28 -
AIR BAG
1: Select “Air Bag” and press Y, a message will be displayed giving information
about connecting an adaptor, press Y to continue. The “Main Menu” will be
displayed.
2: Select “Codes Only” and press Y, the following “Code List” should be displayed,
(example):
NOTE: Some Systems may also display “Data”.
3: Use the thumbwheel to scroll through the “Code List”.
4: Press N to enter the “Exit Menu” functions, (these functions are exactly the
same as previously described, i.e. Resume, Print Screen, etc.), press N again
to return to the “Main Menu”.
*******
OPERATION
CODE LIST
* * * * CODES ONLY * * * *
30 PASSENGER AIR BAG DISABLED
33 BATTERY LOW VOLTAGE
To Next Page
Loading...
Need help?
General
