- 25 -
8: REVIEW MOVIE EXIT MENU
Press N to leave the Review Movie. The “Review Movie Exit” menu is displayed:
This “Exit” menu is similar to the “Exit” menu for data viewing modes, except that
“Arm Movie”, “Custom Data List” and “Clear Codes” are not available. The menu
selections operate the same as the “Exit” menu selections for data viewing modes
with the following variations:
RESUME
“Resume” returns to the same frame and line position from which was exited. It
does not return to frame 0. Thumbwheel scrolling, fixed lines and LED operation
remains as they were set before exiting.
PRINT OPTIONS
The “Print Frame” and “Print Screen” selections operate the same as “Codes &
Data”. Operation is the same as explained in the earlier “Exit Menu” section of
this manual.
LED MENU
The “LED Menu” selection operates the same as it does when exiting from “Codes
& Data”. After resetting the LED assignments, the Scanner returns to the same
movie frame and screen from which was exited. The LEDs will now flash to indicate
the newly assigned parameter conditions as recorded in the movie.
*******
OPERATION
>RESUME [PRESS N FOR MAIN MENU]
PRINT SCREEN LED MENU
PRINT FRAME
To Next Page
Loading...
Need help?
General
