Snooper DVR-4HD - Initial Settings Configuration; Setting the Time Zone

2.8 Initial Settings
Before using the device, we recommend you setup the correct
Time zone, Date and Time.
Note:
Please note that if you press the / button during recording, the system will stop
recording and enter the OSD menu. Before accessing the menu make sure the recording is
stopped.
2.8.1 Set the Time
Zone
To set the time zone, do the following:
1. Press the
/
button to enter the OSD menu.
2. Press the or button to
select Set Time Zone, and then
press the button to enter
the function menu.
3. Press the or button to
set the current time zone, and
then press the button to
save the setting.
4. Press the button to return
to recording screen.
DVR-4/5 HD Gen2 V1.2 EN 04/18
21