3.4.2 Speed Limit Alert
If the Speed Limit Alert function is enabled, this product produces
an audible alert and screen message once your car’s location is
determined by GPS and its running speed exceeds the set limit.
To activate the Speed Limit Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Speed Limit Alert, and then
press the button to enter the function menu.
3. Press the / button to set up a Speed Limit Alert to
trigger this product’s alarm [Off / 50 ~ 200 km/h (30~125
mph)], and then press the button to complete setting.
4. Press the button to return to the recording screen.
5. The alarm screen turns red to remind you to slow down if you
are driving faster than the speed limit.
To Next Page
Loading...
