Snooper DVR-4HD - Driving Safety Functions; Collision Detection System

3.6 Collision Detection
If the Collision Detection function is enabled, this device begins
emergency recording once it detects any collision. The sensitivity of
the Collision Detection function is set to Normal by default, to
change the settings of Collision Detection:
1. Press the
/ button to
enter the OSD menu.
2. Press the or button to
select Collision Detection, and
then press the button to
enter the function menu.
3. Press the or button to
change the sensitivity of this
device’s Collision Detection
(Off / High Sensitivity / Normal
Sensitivity / Low Sensitivity),
and then press the button
to set the sensitivity.
4. Press the button return to
the recording screen.
DVR-4/5 HD Gen2 V1.2 EN 04/18
33