3 Using the Drive Recorder
3.1 Automatic Recording
Once the car engine starts, the device will automatically power on
and start recording.
Recording will automatically stop when the engine is switched off.
Note:
1. Some vehicle power supplies do not turn on / off automatically when the car engine
starts. If the device cannot automatically power on / off with the car engine, please
manually connect the power supply to the vehicle power, and then power on, or
manually power off the device and then remove the connector from the vehicle power
supply.
2. The recorder can be configured to save a video file every 30 seconds, for between 1
to 3 minutes duration.
3. All the videos and photos are saved on the memory card, if memory card is full, loop
recording will overwrite the oldest video file.
To Next Page
Loading...
