Snooper DVR-4HD - Driving Safety Functions; Driver Fatigue Alert; Lane Departure Warning System (LDWS)

3.7 Driver Fatigue Alert
If the Driver Fatigue Alert function is enabled, this product
produces an audible alert and screen message one hour after it
has begun recording and repeats the alerts every half hour
afterwards.
To enable the Driver Fatigue Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Driver Fatigue Alert,
and then press the button to enter the function menu.
3. Press the / button to select On, and then press the
button to enable the function.
4. Press the button return to the recording screen.
5. This product produces an audible alert and screen message
when Driver Fatigue Alert activates.
3.8 LDWS
On
ce your car’s location is determined by GPS and the LDWS
function is enabled, this camcorder produces an audible alert and
screen message when you deviate from or change lanes at speeds
over 70 km/h (43 mph).
To set the LDWS (Lane Departure Warning Systems):
1. Press the button to enter the OSD menu.
2. Press the / button to select LDWS, and then press
the button to enter the function menu.
3. Press the / button to select On, and then press the
button to enable the function.
DVR-4/5 HD Gen2 V1.2 EN 04/18
34