Snooper DVR-4HD - Initial Settings Configuration; Setting the Date and Time

2.8.2 Set the Date / Time
To set the correct date and time, do the following:
1. Press the
/
button to enter the OSD menu.
2. Press the or button to select Date / Time, and then
press the button to enter the function menu.
3. Press the or button to
adjust the value, and then press
the button to set the data
and proceed to the next field.
4. Repeat step 3 until the date and
time setting is completed.
5. Press the button to return
to recording screen.
Note:
To ensure the accuracy of the video file time, please reset the date and time when the battery
power runs out or when not in use for more than 7 days.
DVR-4/5 HD Gen2 V1.2 EN 04/18
23