SolarEdge SE66.6KUS - Opening Conduit Guides

4.
OpentherequiredACandDCconduitopeningsaccordingtotheconduitsusedintheinstallation.
Theconduitentries(usuallycovered)andthedrillguidesarelocatedatthebottomoftheenclosure.

Figure 16: Connection Unit drill guides
l
OpentheDCentrycover.Ifneeded,knockouttheDCdrillguide.
NOTE
The Connection Unit is provided with one open DC conduit opening and with one closed drill
guide. If you require an additional conduit entry, open the drill guide.
l OpentheACconduitentry.
IfusingoneSecondaryUnit,openthedrillguideaccordingtothesmallersizemarking.Ifusing
twoSecondaryUnitsyoucanopenittoalargerdiameteraccordingtothecablesize.
NOTE
Unused conduit openings and glands should be sealed with appropriate seals.
-Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.4
28
Opening Conduit Drill Guides