SolarEdge SE66.6KUS - Communication; Power Control

3.
WhenPairing Completeisdisplayed,thesystemstartupprocessbegins:
SincetheinverterisON,thepoweroptimisersstartproducingpowerandtheinverterstarts
convertingAC.
WARNING!
When you turn ON the inverter ON/OFF/P switch, the DC cables carry a high voltage and the power
optimisers no longer output a safe 1V output.
AVERTISSEMENT!
Après avoir mis l'interrupteur ON/OFF/P de l'onduleur monophasé sur ON, les câbles DC portent
une haute tension et les optimiseurs de puissance ne génèrent plus la tension de sécurité de 1V.
WhentheinverterstartsconvertingpoweraftertheinitialconnectiontotheAC,theinverterenters
Wakeupmodeuntilitsworkingvoltageisreached.Thismodeisindicatedbytheflickeringgreen
inverterLED.
Whenworkingvoltageisreached,theinverterentersProductionmodeandproducespower.The
steadilylitgreeninverterLEDindicatesthismode.
4. TapOKtoreturntothemainmenu.
Communication
Communicationsettingscanbeconfiguredonlyaftercommunicationconnectionsarecomplete.Refer
toSettingUpCommunicationonpage57.
1.
SelecttheCommunication menutodefineandconfigurethefollowing:
l Thecommunicationoptionusedbytheinvertertocommunicatewiththemonitoringplatform
l ThecommunicationoptionusedtocommunicatebetweenmultipleSolarEdgedevicesorother
externalnon-SolarEdgedevices,suchaselectricitymetersorloggers.
2.
TaptheServer redarrowtosetthecommunicationmethodtobeusedforcommunicationbetween
devicesandtheSolarEdgemonitoringplatform.ThedefaultisLAN.
NOTE
The Server menu shows only the communication options installed in the inverter.
Fordetailedinformationaboutalltheconfigurationoptions,refertotheCommunication
OptionsApplicationNote,availableontheSolarEdgewebsiteat
https://www.solaredge.com/sites/default/files/solaredge-communication_options_
application_note_v2_250_and_above.pdf.
Power Control
PowercontroloptionsaredetailedinthePowerControlApplicationNote,availableonthe
SolarEdgewebsiteathttps://www.solaredge.com/sites/default/files/application_note_
power_control_configuration.pdf.

TheGridControloptionmaybedisabled.Enablingitopensadditionaloptionsinthe
menu.

-Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.4
44
Communication