SolarEdge SE66.6KUS - Activating, Commissioning, and Configuring with SetApp; Activating the Installation

Chapter 5: Activating, Commissioning and
Configuring the System Using the Inverter
SetApp
Ifapplicable,youcanconnectcommunicationoptionsatthisstage,asdescribedinSettingUp
Communicationonpage57.
Onceallconnectionsaremade,thesystemshouldbeactivatedandcommissionedusingtheInverter
SetAppmobileapplication.YoucandownloadtheappfromtheAppleAppStoreandGooglePlaypriorto
reachingthesite.


Internetconnectionisrequiredforthedownloadandfortheone-timeregistration,howevernot
requiredforusingtheSetApp.
Step 1: Activating the Installation
Duringsystemactivation,aWi-Ficonnectioniscreatedbetweenthemobiledeviceandtheinverterand
thesystemfirmwareisupgraded.
Before activation-download,register(firsttimeonly)andlog-intoSetApponyourmobiledevice.
Internetconnectionisrequiredforthedownloadandfortheone-timeregistration.Verifythatthe
applicationisupdatedwiththelatestversion.
To activate the inverter:
1. TurnONtheACcircuitbreakeronthemaindistributionpanel.
2. MovetheConnectionUnitDCswitchtotheONposition.
3. OpenSetAppandfollowtheinstructionsonthescreen(scantheinverterbar-code;movethe
ON/OFF/PswitchtoPpositionandreleasewithin5sec.backtoON(1)position).SetAppcreatesa
Wi-Ficonnection,upgradestheinverterCPUfirmwareandactivatestheinverter.
4.
Whentheactivationiscomplete,dooneofthefollowing:
l SelectActivate Another Invertertocontinueactivatingadditionalinverters
l SelectStart Commissioningforpairingandothersystemconfiguration.TheCommissioning
screenisdisplayed.Refertothenextsectionformoreinformation.

-Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.4
42
Chapter 5: Activating, Commissioning and Configuring the System Using the Inverter