c )Off-grid Mute
Here you can choose whether the buzzer is turned on when the inverter
is running in off-grid mode. Select Yes, the buzzer mutes, select NO,
off-grid mode, the buzzer will sound once every 4s when the battery is
fully charged, the closer the battery is to the empty state, the higher the
buzzer will sound, to remind users to avoid battery loss .
f ) Backup mode
Iin this mode, you can set the minimum battery reserve power.
>Min SOC:
0%
Backup mode
e) Self-use mode
In this mode, you can set the minimum reserved battery power
percentage and set the battery upper limit power.
>Min SOC:
0%
Self-use mode
d)Feed-in Priority mode
In this mode, you can set the minimum battery reserve power.
>Min SOC:
0%
Feed-in Priorty mode
g) Charge and discharge time
Here you can set the charge and discharge time period.
If two charging and discharging periods are needed, turn on the charging
and discharging period 2 and set the period.
80
81
> SOC Upper Limit:
0%
Self-use mode
Setting
Setting
> Mute:
Yes
Off-grid Mute
> Charge Period
Start Time
Chrg&Dischrg Period
> Charge Period
End Time
> Start Time
Allowed Disc Period
> End Time
Allowed Disc Period
Charge Period
>Function
Enable Disable
Chrg&Dischrg Period2
h)User Password
The default password for the end user is "0000", where you can reset the
new password and press the up/down key to increase or decrease the
value. Press "Enter" to confirm the value and jump to the next digit .When
all passwords have been entered and confirmed, press "OK" to set the
password successfully.
>
0 0 0 0
User Password