SolaX Power X3-Hybrid G4 Series - Application of Datahub; Introduction of Datahub Application; Wiring Connection Diagram

145
Appendix
15.4 Application of DataHub
15.4.1 Introduction of DataHub Application
SolaX DataHub can be connected to inverters through RS485 to control the output
power of the entire power station according to on-site requirements. Besides, it can work
with SolaXCloud to monitor all inverters, allowing for real-time data display and device
management. In the entire system, a maximum of 60 X3-Hybrid G4 series inverters can be
connected to the DataHub.
15.4.2 Wiring Connection Diagram
Common
loads
AC
COM
DataHub
CT
Grid
Figure 15-10 DataHub wiring diagram