24
4 Transportation and Storage
If the inverter is not put into use immediately, the transportation and storage requirements
need to be met:
Transportation
• Observe the caution signs on the packaging of inverter before transportation.
• Pay attention to the weight of the inverter. Carry the inverters by the required
number of personnel as specified by local regulations. (gross weight of X3-Hybrid
G4: 34±1 kg)
• Wear protective gloves when carrying the inverter by hand to prevent injuries.
• When lifting up the inverter, hold the handle position and the bottom position of
the carton. Keep the inverter horizontal in case of falling down.
Figure 4-1 Caution signs on the packaging
Storage
• The inverter must be stored indoors.
• Do not remove the original packaging material and check the outer packaging
material regularly.
• The storage temperature should be between -40°C
and +70°C. The relative
humidity should be between 35%RH and 70%RH.
• Stack the inverter in accordance with the caution signs on the inverter carton to
prevent their falling down and device damage. Do not place it upside down.
To Next Page
Loading...
