35
Mechanical Installation
7.1 Dimensions for Mounting
Before installation, check the dimensions of the bracket and ensure that enough space is
reserved for the installation and heat dissipation of the entire system.
503
503
199
Figure 7-3 Dimensions 1 (Unit: mm)
360
45
162162
164
94.5
Figure 7-4 Dimensions 2 (Unit: mm)
7.2 Installation Procedures
Step 1: Horizontally align the bracket with the wall, adjust the position of the bracket with
a spirit level until the bubble stays in the middle, and then mark holes. (5 holes)
Please note that take the height of the battery into account when determining the
position of the bracket.
Figure 7-5 Marking the holes
To Next Page
Loading...
