SolaX Power X3-Hybrid G4 Series - About

110
Operation on LCD
• NO/NC: NO (Always on) by default.
»
NO (Always on): When the switch is disconnected, the inverter works
normally, and when the switch is connected, the inverter shuts down.
»
NC (Always closed): When the switch is connected, the inverter works
normally, and when the switch is disconnected, the inverter shuts down.
======Shut Down======
Function Control
> NO (Always on) <
10.9 About
Displaying path: Menu > About
Here shows the basic information of the inverter, battery and internal code. After entering
the About interface, you can check those information.
• Inverter
»
Inverter SN, Register SN, ARM Verion, DSP version, On-grid Runtime, EPS
Runtime
• Battery
»
BatBrand, Bat_M SN (SN of BMS), Bat_PS1 SN (SN of battery module 1), Bat_
PS2 SN (SN of battery module 2), Bat_PS3 SN (SN of battery module 3), Bat_
PS4 SN (SN of battery module 4), Battery M Version (software version of BMS)
and Battery S version (software version of battery module).
• Internal Code
»
Internal code of inverter and battery.