SolaX Power X3-Hybrid G4 Series - Preparation before Installation; Selection of Installation Location; Environment Requirement

25
5 Preparation before Installation
5.1 Selection of Installation Location
The installation location selected for the inverter is quite critical in the aspect of the
guarantee of inverter safety, service life and performance. It has the IP65 ingress protection,
which allows it to be installed outdoor. The installation position shall be convenient for
wiring connection, operation and maintenance.
5.1.1 Environment Requirement
• The ambient temperature: -35°C to +60°C.
• The relative humidity shall be between 4-100%RH.
• Do not install the inverter in the areas where the altitude exceeds 3000 m.
• Install the inverter in a well-ventilated environment for heat dissipation.
• Do not install the inverter in areas with flammable, explosive and corrosive
materials or near antennas.
• Avoid direct sunlight, rain exposure and snow accumulation.
3000 m
Avoid direct sunlight Avoid rain exposure Avoid snow accumulation
-35°C
+60°C
4-100%RH