SolaX Power X3-Hybrid G4 Series - Connection of Two Meters

165
Appendix
15.6.4 Connection of Two Meters
If you have another power generation equipment (such as an inverter) at home and wants
to monitor both equipment, our inverter provides a Meter 2 Communication function to
monitor the other power generation equipment.
NOTICE!
• For connecting CT and meter, or connecting two meters, prepare an RJ45 splitter
adapter and a proper waterproof enclosure for it in advance.
• The device for monitoring the system (device at Meter 1 position) can be CT, direct
connected meter and CT-connected meter, but the device for monitoring the other
power generation equipment (device at Meter 2 position) can only be meters, either
direct-connected meter or CT-connected meter. The following diagrams use the
connection of CT and direct-connected meter for example.