50
Electrical Connection
Step 2: Insert the stripped cable into the PV pin contact (part K and M).
+
-
Figure 8-17 Inserting the PV pin contact
Step 3: Make sure the the PV cable and PV pin contact are of the same polarity. Crimp it
with crimping tool for PV terminal. Pay attention to the crimping position.
+
-
Figure 8-18 Crimping the terminal
Step 4: Thread the PV cable through swivel nut and insert the cable into the PV
connector (part J and L).
+
-
Figure 8-19 Threading the PV cable
To Next Page
Loading...
