SolaX Power X3-Hybrid G4 Series - Page 87

79
Operation on LCD
There are seven submenus in the menu that can be selected for relevant setting operations.
• System ON/OFF: Switch on and off the inverter.
• Mode Select: Select the working mode of the inverter, including Self Use, Feed-in
Priority, Backup Mode, Manual, Peaking Shaving and TOU.
Mode Select
Self Use
Feed-in Priority
Backup Mode
Manual
Peak Shaving
TOU
• System Status: Display the real-time value of PV, battery, etc. Including PV1, PV2,
Battery, On-grid, EPS and Meter/CT.
System Status
PV1
PV2
Battery
On-grid
EPS
Meter/CT
• Parallel Status: Display all the status data from master inverter when the inverters
are parallel-connected.
• History Data: Display the history data of On-grid, EPS, E_Feedin, E_USERDEF
and Error Log.
History Data
On-grid
EPS
E_Feedin
E_USERDEF
Error Log
• Setting: Set the parameters of the inverter, including User Setting and Advance
Setting.