Setting
Setting
2 ) Grid Parameters
Here you can set the protection value of grid voltage and frequency.
The default value is the specified value under the current safety
regulations, and the user cannot change it.
The display content will be displayed according to the requirements
of local laws and regulations, which are constantly increasing. Please
refer to the contents displayed on the inverter screen.
100
101
UFPL_Setting
UFPL_DelayTime
0.0S
OFPL_Setting
fstop-ch
00.00Hz
OFPL_Setting
fP max
00.00Hz
Connection
Low frequency
00.00Hz
Connection
Connection
High frequency
00.00Hz
Low voltage
00.0V
Connection
Connection
Connection
Observation time
0.0S
Gradient Select
Disable Enable
Connection
Gradient
0%
High voltage
00.0V
Grid Parameters
Local Command
0 1
Connect Slope
0%
Reconnect Slope
0%
Grid Parameters
Grid Parameters
Grid Parameters
Vac 10min Time
0.0 s
> Connection
Grid Parameters
Low frequency
00.00Hz
High frequency
00.00Hz
Low voltage
00.0V
Observation time
0.0S
Gradient Select
Disable Enable
Gradient
0%
High voltage
00.0V
Grid Parameters
Reconnection
> Reconnection
Reconnection
Reconnection
Reconnection
Reconnection
Reconnection
Reconnection Grid Parameters
> Pf Function
Disable Enable
Pf Function
OFPL_Curve
Symmetric
OFPL_Setting
>OverVoltage_L1
0.0V
>OverVoltage_L2
0.0V
>OverFreq_L1
0.00Hz
>UnderFreq_L1
0.00Hz
>UnderVoltage_L1
0.0V
Grid ParametersGrid Parameters
>Vac 10min Avg
0.0V
Grid Parameters
Grid ParametersGrid Parameters
Grid Parameters
Grid ParametersGrid Parameters
Grid Parameters
Grid ParametersGrid Parameters
Grid Parameters
Grid ParametersGrid Parameters
Grid Parameters
Grid ParametersGrid Parameters
Grid Parameters
Grid Parameters
>UnderVoltage_L2
0.0V
>OverFreq_L2
0.00Hz
>UnderFreq_L2
0.00Hz
>Tovp_L1
0ms
>Tuvp_L1
0ms
>Tofp_L1
0ms
>Tufp_L1
0ms
>Tovp_L2
0ms
>Tuvp_L2
0ms
>Tofp_L2
0ms
>Tufp_L2
0ms
>Reconnection Time
0.0s
>Checking Time
0.0s
Grid Parameters
> OFPL_Setting
OFPL_Setting
W(Gra)
0%
OFPL_Setting
Tstop
0.0S
OFPL_Setting
fstop-disch
OFPL_Setting
fP min
00.00Hz
00.00Hz
UFPL_Setting
00.00Hz
UFPL_RemovePoint(Aus.)
UFPL_UnderFreqfhyste(Aus.)
00.00 Hz
UFPL_Setting
UFPL_StartPoint
UFPL_Setting
00.00Hz
OFPL_Setting
UFPL_DropRate
0%
UFPL_Setting
Grid Parameters
> UFPL_Setting
OFPL_Curve
Asymmetry
OFPL_Setting
OFPL_RemovePoint(Aus.)
50.10Hz
OFPL_Setting
OFPL_OverFreqfhyste(Aus.)
50.15Hz
OFPL_Setting
OFPL_StartPoint
OFPL_Setting
OFPL_Setting
50.25Hz
OFPL_DropRate
5%
OFPL_Setting
OFPL_DelayTime
0.0S
OFPL_Setting
OFPL_DropRate
Setting path: Main -> Setting -> Advance Setting -> Grid Parameters.
To Next Page
Loading...
