6
Product Overview
2.4 Symbols on the Label and Inverter
Table 2-2 Description of symbols
Symbol Description
CE mark.
The inverter complies with the requirements of the applicable CE
guidelines.
TUV certified.
RCM mark.
The inverter complies with the requirements of the applicable RCM
guidelines.
Additional grounding point
Beware of hot surface.
Do not touch a running inverter, as the inverter becomes hot during
operation!
Risk of electric shock.
High voltage exists after the inverter is powered on!
Risk of danger.
Potential hazards exist after the inverter is powered on!
Observe enclosed documentation.
The inverter can not be disposed together with the household waste.
Do not operate this inverter until it is isolated from battery, mains and on-
site PV generation source.
Danger to life due to high voltage.
Residual voltage exists after the inverter is powered off, which needs 5
minutes to fully discharge. Wait 5 min before attempting any service.
To Next Page
Loading...
Need help?
General
