23
4 Transportation and Storage
If the inverter is not put into use immediately, the transportation and storage requirements
needs to be met:
Transportation
• Observe the caution signs on the packaging of inverter before transportation.
• Pay attenting to the weight of inverter. Be cautious to avoid injury when carrying
X3-ULTRA (gross weight: 62 kg). Transport according to the personnel quantity
required by local regulations.
• Wear protective gloves when carrying the equipment by hand to prevent injuries.
• When lifting up the inverter, hold the handle position and the bottom position of
the inverter. Keep the inverter horizontal in case of falling down.
Figure 4-1 Caution signs on the packaging
Storage
• The inverter must be stored indoors.
• Do not remove the original packaging material and check the outer packaging
material regularly.
• The storage temperature should be between -40
℃
and +70
℃
. The humidity
should be between 5% and 65%.
• Stack the inverter in accordance with the caution signs on the inverter carton to
prevent their falling down and device damage. Do not place it upside down.
To Next Page
Loading...
Need help?
General
